Medicool - Pro Power 35k Hand Piece

Medicool - Pro Power 35k Hand Piece

(Will NOT work in a Pro Power 35K Portable)

1. Plug handpiece into corresponding nail machine unit. 2. Plug unit into appropriate outlet, ensuring that all switches and dials are set to “off” prior to doing so. 3. Confirm speed is set to 0 before use. While unit is off, toggle directional switch to forward or reverse; it is not recommended to leave it in neutral, as this is only to change between forward and reverse while operating. 4. Turn unit on and set speed as desired. To toggle between forward and reverse, first set speed back to 0 and allow bit to completely stop spinning before toggling directional switch, then set speed again. 5. Set speed back to 0 after using. Do not leave speed set above 0 while not in use. Do not leave in neutral. Note: Recommended to leave a "spacer" bit (comes with most nail machines) inserted in the handpiece while not in use. Nail machines should taken in for cleanings roughly every 3 months to remove debris and prevent overheating and failure of the unit.