How To - Glow in the Dark Designs
  1. You can use any colour for a base, but black will give the most contrast for the design to pop (we recommend Fuzion Fortify HEMA Free #02). For this design, we will be demonstrating a neon-lights style effect.
  2. Apply a thin layer of your preferred tack-free top coat (we used Fuzion Fortify HEMA Free Shiny) and do NOT cure.
  3. Take a small amount of Fuzion FX Glow-In-The-Dark Topcoat and mix about a 50/50 ratio with the colour of your choice. You can also use a pigment to add a glow effect, such as the Wildflowers Glow Pigment Powder. For mixing, we used the Ugly Duckling Crystal Palette. Tip: The lighter your colour choice is, the brighter the glow will be!
  4. Paint your design on the uncured topcoat as desired and cure for the recommended time.
  5. Mix a small amount of your glowing medium with white (Fuzion Fortify HEMA Free #01 is perfect for this) and trace over your lines, keeping them thin. Use a detailer brush such as the Fuzion Detailer II for this. Cure again for the recommended time.
  6. Apply top coat, and done! Note that the longer this nail design is exposed to bright light, the better it will glow in the dark.